Kit Includes :
- TechT Genuine Vortex Mod SS
- TechT Lightening Rod
- TechT Quick Exhaust Piston Housing ( QEPH ) Black
- TechT Squishy Paddles - with Two Top Paddles!
- Lifetime Warranty
- Made in the USA
- All Metal Replacement Parts
|
The Vortex Mod was the FIRST hard-coated and teflon impregnated aluminum internals to replace the stock plastic internals of the Tippmann Cyclone Feed to be released in the paintball industry.
The Vortex Mod SS now incorporates a stainless steel axle and design changes to make it the most
durable and easiest upgrade to install.
The popularity of electronic controls in Tippmann A5, X7, and 98's that allow for rates of fire of up to 30 BPS, has warranted the need for higher performing internals for the cyclone feed that will allow the loader to keep up with the marker.
Our testing has shown that the Vortex Mod SS will allow the Cyclone feed to work at lower pressures, feed faster, and virtually never wear out. If it does we will replace the worn parts for life.
While stock cyclone internals need to be replaced on a regular basis, the Vortex Mod is a permanent solution that makes the cyclone faster and more reliable.
|
 |
 |
Since its release, the Vortex Mod has been the most widely used, and most trusted name in cyclone upgrades.
The Vortex Mod SS is specifically designed to be the fastest, smoothest actuating, and most durable/long lasting upgrade available. And did we mention it was easy to install?
The "Original" Vortex Mod was by far the most durable and highest performing cyclone upgrade available. In the past we said that if our Vortex Mod wasn't the best Cyclone Ratchet Upgrade in the world that we would redesign it to crush the competition, and that's exactly what we did.
With a new stainless steel axle and design refinements it is now far and away the "best of the best".
The Vortex Mod SS will feed upwards to 30+ balls per second and continue to load down to pressures as low as 150psi.
Stock parts only feed up to 15 balls per second and only down to a pressure of 400 psi.
|
|
The Lightening Rod is designed to work with the stock parts or in conjunction with our Vortex Mod and Quick Exhaust Piston Housing. Together, the parts will yield higher rates of fire and increased air efficiency. Users have reported feed rates as high as 30-35 balls per second when using the the Lightening Rod in conjunction with the other TechT Cyclone Feed Upgrades.
The secret to the performance gains is the brass bushing located where the ratchet and piston rod met. This bushing creates less friction than the stock's design with just a plastic hole. This bushing creates a smoother and faster action, increasing the speed and reliability of the Cyclone.
The Lightening Rod is made of 7071 grade anodized billet aluminum which is stronger than any other like it. This stronger aluminum will not bend or break like the plastic, giving it a much longer wear life. It also allows all of the power needed to drive the Cyclone to be directed straight through the Lightening Rod to the ratchet system and not be lost in the bending action like the stock.
Our Testing has shown:
1. With the Vortex Mod and Lightening Rod, your Cyclone will continue to feed at lower pressures. This means little to no manual feeding when you get low on air.
2. Due to the use of teflon and our modified ratchet and axle design your loader will have less internal friction with each cycle, yielding higher potential rates of fire and less wear and tear.
